actually ABS brake system is made to reduce accidents due to slippery road rain or in snowy conditions.
following explanation of ABS brakes.
At the time of sudden braking, at high speed or during rain or snow that makes the road slippery. Surely you will have difficulty in braking suddenly. The wheels become locked and the car is hard to control. This anti-lock braking system will help you, in sudden braking, and assist you in controlling the car.
ABS component (Anti lock break system).
- Speed Sensor
serves to read the speed of rotation of the wheel, located on each wheel or at the differential (depending on the factory). want to scratch where that is certainly not far from the wheel.
- Braking Valves
In every brake fluid lane there is a valve, and this valve is controlled by computer / ABS controller. In general, brake valves have three different positions.
1.Fight Position One: In this position, the valve in full open position, so that the brake fluid pressure in full, immediately forwarded to the brake.
2.Move Position Two: In this position, the valve will block the brake fluid pressure, so the pressure will not be forwarded to the brake even though the driver presses the brake.
3.Fight Position Three: In this position, the valve will block some of the brake fluid pressure, so the pressure is only half that is forwarded to the brake, although the driver presses the brake fully.
- Pump
The function is to restore the pressure on the braking lanes released by the valve to the brake.
- Controller / Computers
The function of this tool is the brain that controls the valves and processes the data from the speed sensor.
these four components are interrelated if one of these components does not work abs will not work properly so be careful if you fix it yourself.
No comments:
Post a Comment